Engine Controls - MIL ON/DTC P1164 Stored In Memory

02-028

October 22, 2011

Applies To:
See VEHICLES AFFECTED

2002 CR-V: MIL Comes On With DTC P1164

(Supersedes 02-028, dated July 23, 2011, to update the information marked by the asterisks and black bars)





REVISION SUMMARY

*Under WARRANTY CLAIM INFORMATION, the flat rate was changed.*

SYMPTOM

The MIL is on and DTC P1164 [air/fuel sensor (sensor 1) circuit range/performance problem] is set.

PROBABLE CAUSE

Some driving conditions may cause the ECM/PCM software to set a DTC P1164. This is a software issue, not a problem with the air/fuel sensor.





VEHICLES AFFECTED

CORRECTIVE ACTION

*Update the ECM/PCM software.*

WARRANTY CLAIM INFORMATION





The normal warranty applies.

Failed Part Code: P/N 37820-PPA-A52

Defect Code: 07201

Symptom Code: 03203

Skill Level: Repair Technician

REPAIR PROCEDURE

1. Use the Honda Diagnostic System (HDS) with version 1.011.014 or later software to clear the DTC.

*2. Make sure you have the iN CD (March '04 or later) loaded into your iN master terminal.*

*3. Update the ECM/PCM software. Refer to S/B 01-023, Updating Control Units/Modules.*





Disclaimer