Dashboard Lower Cover

Dashboard Lower Cover Removal/ Installation

NOTE:
- When prying with a flat-tip screwdriver, wrap it with-protective tape, and apply protective tape around tape related parts, to prevent damage.
- Take care not to scratch the dashboard and related parts.




1. Remove the dashboard lower cover (A).
1. Remove the screw.
2. Gently pull down on the lower cover to release the clips.
3. If equipped, disconnect the air hose (B) and in car temperature sensor connector (C), then remove the cover.

2. Install the lower cover in the reverse order of removal, and note these items:
- Make sure the in-car temperature sensor connector is plugged in properly, and the air hose is connected properly (for some models).
- Push the clips into place securely.