Third Row Seat-Back Recline Cable Replacement
Third Row Seat-back Recline Cable ReplacementNOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to bend the cables.
- Take care not to kink or scratch the interior trim.
- Put on gloves to protect your hands.
1. Remove these items:
- Recline lever trim.
- Recline upper cover.
2. Remove the seat-back cover as necessary.
3. Disconnect and detach the seat-back recline cable (A) from the seat-back recline lever (B) and the link plates (C) on both sides. Then remove the seat-back recline cable.
4. Install the cable in the reverse order of removal, and make sure the recline cables are routed properly and connected securely.