Front Seat Disassembly/Reassembly - 8-Way Power
Front Seat Disassembly/Reassembly - 8-Way Power02-04 models With Side Airbag
- SRS components are located in this area. Review the SRS component locations, precautions and procedures before performing repairs or service.
- For '03-04 models: The operation of the driver's seat position sensor must be checked after any of these actions;
- Driver's seat position sensor replacement
- Cover plate (front side of driver's seat slide rail) replacement
NOTE:
- Route the seat wire harness correctly.
- Make sure the bushing and pivot washer are installed correctly.
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.
- Replace the back panel clips with new ones.