Electronic Climate Control

How to Retrieve a DTC

The climate control unit has a self-diagnosis function. To run the self-diagnosis function, do the following:







1. Turn the Ignition switch ON (II).
2. Press the AUTO button and then press the OFF button. Continue to hold both buttons down for 1 minute.

If there is any abnormality in the system, the temperature Indicator will light up the segment (A through N) corresponding to the error. The temperature indicator will then alternate every second between displaying "88" (all segments lit) and the error code segment (A through N).

NOTE: The system will only display the DTC when the AUTO and OFF buttons are pressed. If you release the buttons, the display will go blank. To return the display, simply press the AUTO then the OFF buttons again.




To determine the meaning of the DTC, refer to the DTC Troubleshooting Index. Diagnostic Trouble Code Descriptions If there is no abnormality, the segment will not light up.