Sunroof / Moonroof Switch: Testing and Inspection

Switch Test

NOTE: The moonroof can still be operated for about 10 minutes after the ignition switch is turned from the "II" to the "I" or "O" positions, as long as none of the doors are opened. This provides a convenience to parked occupants while offering a degree of security against unwanted or accidental moonroof operation.




1. Carefully push out the moonroof switch (A) from behind the dashboard lower cover, then disconnect the 6P connector (B) from the switch.




2. Check for continuity between the terminals in each switch position according to the table.
3. If the continuity is not as specified, replace the bulb (C) or the switch.