Engine Controls - MIL ON/DTC P0420 Is Stored
03-063October 11, 2011
Applies To:
2003 Accord L4 except SULEV - All
2003 Accord L4: MIL Comes On With DTC P0420
(Supersedes 03-063, dated July 23, 2011, to update the information marked by the black bars)
REVISION SUMMARY
*Under WARRANTY CLAIM INFORMATION, a flat rate time was changed.*
SYMPTOM
The MIL is on and DTC P0420 (catalyst system efficiency below threshold) is set.
PROBABLE CAUSE
The ECM/PCM may incorrectly interpret sensor inputs and set DTC P0420.
CORRECTIVE ACTION
Update the ECM/PCM software.
WARRANTY CLAIM INFORMATION
The normal warranty applies.
Failed Part: P/N 37820-RAA-A54
Defect Code: 072
Contention Code: B03
Skill Level: Repair Technician
REPAIR PROCEDURE
1. Use the HDS to clear DTC P0420.
2. Make sure you have the iN CD (September '03 or later) loaded into your iN master terminal. If not, load the CD using the instructions that come with it.
3. Update the ECM/PCM software with the Honda Interface Module (HIM). Refer to S/B 01-023, Using the Honda Interface Module to Update Control Units/Modules.
Disclaimer