Instrument Panel
Instrument Panel Removal/InstallationNOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Take care not to scratch the dashboard and related parts.
1. Tilt the steering column down.
2. Remove the instrument panel (A).
-1 Remove the screws (B).
-2 Gently pull out along the bottom to release the clips (C) and hooks (D).
-3 Gently pull out the upper portion of the panel.
-4 With auto A/C: Disconnect the in-car temperature sensor connector (E) and the air hose (F).
3. Install the panel in the reverse order of removal. If equipped, make sure the in-car temperature sensor connector is plugged in properly, and the air hose is connected securely.