Dashboard Pocket

Dashboard Pocket Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.

1. Remove the dashboard center panel.




2. Open the dashboard pocket lid, and remove the screw.




3. Pull out the pocket (A) to release the clips (B, C) and hooks (D), then remove it.
4. Install the pocket in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Push the clips into place securely.