Trim Removal / Installation - Rear Side Area
Trim Removal/Installation - Rear Side AreaSpecial Tools Required
KTC trim tool set SOJATP2014
NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or scratch the trim and panels.
1. Remove these items, then remove the trim in the sequence shown:
- Rear door sill trim
- Cargo area floor mat, cargo floor lid, cargo storage bin, tie-down hooks, rear trim panel
- Accessory power socket (from the left rear side trim panel)
2. Install the trim in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Push the clips into place securely.
- Make sure there are no pinches in the seat belt.