Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Hazard Flasher Relay: Testing and Inspection
Hazard Warning Switch Test1. Remove the center panel.
2. Disconnect the 10P connector (A) from the hazard warning switch (B).
3. Push out the hazard warning switch from behind the center panel (C).
4. Check for continuity between the terminals in each switch position according to the table.
5. If the continuity is not as specified, replace the illumination bulb (D) or the switch.
6. Install the switch in the reverse order of removal.