| Mainshaft | End play | Standard or new | 0.11 - 0.17 mm |
| | Service limit | Adjust |
| Diameter of bushing surface | Standard or new | 20.80 - 20.85 mm |
| | Service limit | 20.75 mm |
| Diameter of distance collar | Standard or new | 31.984 - 32.000 mm |
| | Service limit | 31.93 mm |
| Diameter of ball bearing contact area (clutch housing side) | Standard or new | 27.977 - 27.990 mm |
| | Service limit | 27.94 mm |
| Diameter of needle bearing contact area | Standard or new | 38.984 - 39.000 mm |
| | Service limit | 38.93 mm |
| Diameter of ball bearing contact area (transmission housing side) | Standard or new | 27.987 - 28.000 mm |
| | Service limit | 27.94 mm |
| Runout | Standard or new | 0.02 mm maximum |
| | Service limit | 0.05 mm |
| Mainshaft 3rd, 4th and 5th gears | I.D. | Standard or new | 44.009 - 44.025 mm |
| | Service limit | 44.08 mm |
| End play | Standard or new | 0.06 - 0.16 mm |
| | Service limit | 0.25 mm |
| Thickness | Standard or new | 23.92 - 23.97 mm |
| | Service limit | 23.80 mm |