Part 7 of 7

Transfer assembly	Diameter of transfer shaft on bearing contact area	at roller bearing	Standard or new	38.485 - 38.500 mm
			Service limit	38.43 mm
		at tapered roller bearing	Standard or new	24.975 - 24.990 mm
			Service limit	24.92 mm
	Transfer drive gear diameter	at tapered roller bearing	Standard or new	40.002 - 40.018 mm
			Service limit	38.95 mm
	Diameter of transfer driven gear on tapered roller beraing contact area	at driven gear side	Standard or new	35.002 - 35.018 mm
			Service limit	34.95 mm
		at shaft splines side	Standard or new	26.975 - 26.988 mm
			Service limit	26.92 mm
	Transfer gear backlash		Standard or new	0.06 - 0.16 mm
			Service limit	Adjust
	Total starting torque (Preload)		Standard or new	2.16 - 3.57 Nm
			Service limit	Adjust