Body - Front Window Grinding Noise During Operation
04-068November 19, 2004
Applies To:
2002-03 CR-V - ALL Japan produced (VIN begins with JHLRD)
Grinding Noise When Opening or Closing a Front Window
SYMPTOM
A grinding noise is coming from a front window when it is opening or closing.
PROBABLE CAUSE
The window regulator cable roller is damaged.
CORRECTIVE ACTION
Replace the regulator.
PARTS INFORMATION
WARRANTY CLAIM INFORMATION
In warranty: The normal warranty applies.
Failed Part: P/N 72250-S9A-A02
H/C 6896765
Defect Code: 03001
Symptom Code: 04201
Template ID: 04-068A (driver's side)
04-068B (passenger's side)
04-068C (driver's and passenger's sides)
Skill Level: Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE
1. Replace the window regulator:
^ Refer to page 20-12 in the 2002-04 CR-V Service Manual.
^ In ISIS, enter keyword REGULATOR, and select Front Door Glass and Regulator Replacement from the list.
2. Operate the window, and make sure the grinding noise is gone.
Disclaimer