Transmission Speed Sensor: Service and Repair

Speed Sensors Replacement





1. Disconnect connectors from the drive pulley speed sensor (A), driven pulley speed sensor (B), CVT speed sensor (C), and CVT speed sensor 2 (D).
2. Remove the 6 mm bolts, then remove the speed sensors. Remove the sensor washer (E) from the vehicle speed sensor (C).
3. Replace the O-rings (F) with new ones before installing the speed sensors.
4. Install the sensor washer on the CVT speed sensor 2, and install them.
5. Install the drive pulley speed sensor, driven pulley speed sensor, and CVT speed sensor.
6. Check the speed sensor connectors for rust, dirt, or oil, then connect the connectors securely.