A-Pillar Corner Trim

A-Pillar Corner Trim Replacement

1. Open the front door.




2. Remove the screw securing the A-pillar corner trim (A).




3. Gently slide the A-pillar corner trim (A) to release it from the clips (B).
4. Using a clip remover, remove the clips from the body.
5. Replace any damaged clips.




6. Install the clips (A) on the trim (B).




7. Hold the trim (A) up, and fit the clips (B) into the holes in the body, then push on the trim until the clips snap into place.
8. Install the screw.