Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Driver's Switch Panel

Driver's Switch Panel Removal/Installation

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts to prevent damage.
- Take care not to scratch the dashboard and related parts.




1. Remove the driver's switch panel (A).
1. Using a flat-tip screwdriver, pry out the bottom portion of the panel to detach the clips.
2. Pull out the panel to release the upper hooks (B), then remove the panel.
3. Disconnect the cruise control main switch connector (C) and interior lights switch connector (D).

2. Install the panel in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly.
- Replace any damaged clips.
- Push the clips and hooks into place securely.