Third Row Seat-Back Recline Cable
Third Row Seat-back Recline Cable ReplacementNOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to bend the cable.
1. Remove the third row seat-back recline lever.
2. While holding the lever (A) open, carefully pry out the cover (B) with a flat-tip screwdriver to release the tabs (C), then remove the cover.
3. Disconnect the recline cables (A). There is no inner recline cable on the right recline lever.
4. Install the third row seat-back recline cable in the reverse order of removal, and make sure the cables are connected securely.