Rear Individual Map Lights Test
Rear Individual Map Lights Test1. Turn the interior light switch OFF.
2. If only replace the bulb (A), carefully pry off the lens (B) with a small screwdriver.
3. Remove the grab handle.
4. Disconnect the 3P connector (A) from the light (B),
5. Carefully remove the heat shield from the light. Replace the bulb if necessary.
6. Check for continuity between the terminals.
- There should be continuity between the No. 1 and No. 3 terminals with the switch ON.
- There should be continuity between the No. 1 and No. 2 terminals with the switch OFF.
7. If the continuity is not as specified, replace the light.