Differential Removal

Differential Removal

Special Tool Required
Driveshaft remover 07AAD-S9VA000

1. Drain the differential fluid.
2. Make a reference mark across the propeller shaft, the transmission, and the rear differential, then remove the propeller shaft.
3. Remove the left upper arm bolt, then remove the upper arm from the vehicle.
4. Remove the left rear damper.





5. Using the special tool, pry out both inboard joints (A) from the differential (B).

NOTE: This is a prying tool, do not strike it with a hammer.





6. Place a transmission jack under the rear differential (A).
7. Disconnect the 6P (B) and 2P (C) connectors, then remove the mounting bolts (D) and washer (E).





8. Lower the rear differential a little on the transmission jack, then remove the rear driveshaft (A) from the rear differential.
9. Disconnect the breather tube (B) from the rear differential.
10. Lower the rear differential the transmission jack.