Instrument Panel Removal/Installation

Instrument Panel Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.

1. Remove the driver's dashboard lower cover.
2. Remove the steering column upper cover.




3. Gently pull out the instrument panel (A) along the bottom to release the clips.




4. Remove the instrument panel (A).
1. Gently pull out the upper portion of the instrument panel to release the clips (B, C) and hooks(D,E,F, G).
2. Gently pull out on the panel being careful not to bend the trip/reset (H) and dash lights brightness controller (for some models).
3. On A/T model, slip the shift knob (I) through the hole in the instrument panel.

5. Install the panel in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Push the clips and hooks into place securely.