Removal and Installation

Alternator Replacement

1. Disconnect the battery negative cable, then disconnect the positive cable.




2. Remove the bolt (A) securing the battery clamp, then remove the bulkhead cover (B).




3. Remove the upper brackets and cushions.
4. Remove the drive belt.
5. Remove the auto-tensioner.




6. Remove the three bolts securing the alternator.




7. Disconnect the alternator connector (A) and BLK wire (B), and remove the harness clamp (C) from the alternator.




8. Remove the alternator
9. Install the alternator and drive belt in the reverse order of removal.
10. Install the upper brackets and cushions, make sure they are set securely.
11. Connect the battery positive cable and negative cable to the battery.