Reverse Lock System Circuit Troubleshooting
Troubleshooting1. Check whether DTC 1705 or 1706 is indicated.
Is either DTC indicated?
YES - Perform the troubleshooting for the indicated code(s).
NO - Go to step 2.
2. Turn the ignition switch OFF.
3. Shift the shift lever to the P position while pushing the shift lock release.
4. Turn the ignition switch ON (II).
5. Press the brake pedal and release the accelerator, shift the shift lever out of the P position, and check that the shift lock solenoid operates.
Does the shift lock solenoid operate properly?
YES - Check the reverse lock mechanism. If the mechanism does not work, repair or replace the shift lever assembly.
NO - Do the Shift Lock System Circuit Troubleshooting.