Removal and Installation
Alternator Replacement1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the customer's radio station presets.
2. Disconnect the negative cable from the battery, then disconnect the positive cable.
3. Remove the drive belt.
4. Remove the auto-tensioner.
5. Disconnect the alternator connector (A), BLK wire (B) and harness clamp (C) from the alternator.
6. Remove the positive crankcase ventilation (PCV) valve.
7. Remove the three bolts securing the alternator.
8. Install the alternator and drive belt in the reverse order of removal.
9. Connect the battery positive cable and negative cable to the battery.
10. Enter the anti-theft code for the radio, then enter the customer's radio station preset.
11. Perform the engine control module (ECM)/powertrain control module (PCM) idle learn procedure, and the power window control unit reset procedure.
12. Set the clock.