Oil Seal Replacement

Oil Seal Replacement

Special Tools Required
^ Oil seal driver 07GAD-PH70201
^ Driver 07749-0010000
^ Attachment, 78 x 80 mm 07NAD-PX40100
^ Oil seal driver 07JAD-PL90100








1. Remove the oil seals (A) from the differential housing.





2. Install the right side oil seal (A) squarely using the special tools. Installation depth of the oil seal is 9 mm (0.35 inch) below the machined edge of the differential carrier assembly. Be careful not to damage the lip of the oil seals.





3. Install the left side oil seal (A) squarely and flush with the machined edge of the differential carrier assembly using the special tools. Be careful not to damage the lip of the oil seal.





4. Remove the oil seal (A) from the torque control differential case (B).





5. Install the oil seal (A) squarely using the special tool. Be careful not to damage the lip of the oil seal.