Trim Removal/Installation - Rear Side Area
Trim Removal/Installation - Rear Side AreaNOTE:
- Put on gloves to protect your hands.
- When prying with a fiat-tip screwdriver, wrap it with protective tape to prevent damage.
- Take care not to bend or scratch the trim and panels.
1. Remove these items, then remove the trim in the sequence shown:
- Rear door sill trim
- D-pillar trim
- Rear trim panel
- Third row seat
2. Install the trim in the reverse order of removal, and note these items:
- Replace any damaged clips.
- Push the clips and hooks into place securely.
- Make sure there are no pinches in the belt.