Manual HVAC
How to Retrieve a DTCThe heater control panel has a self diagnosis function. To run the self-diagnosis function, do the following:
1. Turn the ignition switch ON (II)
2. Turn the fan switch OFF
3. Press the recirculation control button to select Recirculation (recirculation indicator comes on)
4. Press and hold the recirculation control button to select Fresh (recirculation indicator goes off). Continue to hold the button The recirculation indicator comes on for 2 seconds, and then goes off.
5. After recording the DTC, release the recirculation control button
- If the system is OK, the recirculation indicator stays off
- If any trouble is found, the recirculation indicator blinks the diagnostic trouble code (DTC) to indicate a faulty circuit or component.