4-Door

Front Seat Disassembly/Reassembly - Manual

Special Tools Required
KTC trim tool set SOJATP2014

'04-06 Models 4-door Passenger's

- SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.
- '04-05 models: The front passenger's weight sensor (SWS) unit must be calibrated after any of these actions:
- Front passenger's seat replacement (including any seat components)
- Replacement of the seat weight sensors
- Replacement of the seat weight sensor unit

- '06 model: The front passenger's seat weight sensor (SWS) must be calibrated after any of these actions:
- Front passenger's seat replacement (including any seat components)
- Replacement of the seat weight sensors






NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Apply multipurpose grease to the moving parts of the seat track.
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.