Park Pin Switch Test

Park Pin Switch Test
1. Remove the center console.








2. Disconnect the park pin switch connector.
3. Shift the shift lever into the P position and release the shift lever button, then check for continuity between connector terminals No. 3 and No. 4. There should be no continuity.
4. Shift out of the P position or press the shift lever button while in P position, and check for continuity between terminals No. 3 and No. 4. There should be continuity.
5. If the park pin switch is faulty, replace it (type A shift lever) or replace the shift lever bracket base (type B shift lever). The park pin switch of the type B shift lever is not available separately.