Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2006 >> CR-V 2WD L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Removal and Replacement >> Front Seat
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Seat

Front Seat Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014

SRS components are located in this area. Review the SRS component locations and the precautions and procedures before performing repairs or service.

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the body or tear the seat covers.
- Put on gloves to protect your hands.

1. Make sure you have the anti-theft code for the radio, then write down the radio station and XM radio channel presets.
2. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
3. Passenger's: Detach the front seat belt lower anchor.




4. Remove the front seat track end covers (A) from the front of both seat tracks.




5. Remove the rear outer seat track end cover (A).




6. Remove the rear inner seat track end cover (A).




7. Remove the bolts securing the front seat (A).




8. Lift up the front seat, then disconnect the seat subharness connector (A) on the driver's and passenger's seats, the seat belt buckle tensioner connector (B) on the driver's and passenger's seats, and the side airbag connector (C) on the driver's and passenger's seats and the weight sensor unit connector (D) on the passenger's seat.
9. With the help of an assistant, carefully remove the front seat through the front door opening.




10. Install the seat in the reverse order of removal, and note these items:
- Apply liquid thread lock to the front seat mounting bolts before reinstallation.
- Make sure each connector is plugged in properly.
- Tighten the seat mounting bolts to the specified torque in the sequence shown. Slide the seat (A) all the way back and tighten (1) and (2), then slide it forward and tighten (3) and (4).
- Passenger's: Before attaching the front seat belt lower anchor, make sure there are no twists or kinks in the belts.
- Reconnect the negative cable to the battery.
- Enter the anti-theft codes for the radio, then enter the customer's radio station and XM radio channel presets.
- Reset the clock.
- Do the power window control unit reset procedure.
pro multis · About Operation CHARM