Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2006 >> CR-V 2WD L4-2.4L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Windows and Glass >> Power Window Control Module >> Testing and Inspection >> Component Tests and General Diagnostics
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Component Tests and General Diagnostics

Resetting the Power Window Control Unit

Resetting the power window control unit is required after performing the following procedures:

- Disconnecting the battery.
- Removing the No. 6 (7.5 A) and/or the No. 23 (20 A) fuses from the under-dash fuss/relay box.
- Disconnecting the driver's door wire harness.

1. Turn the ignition switch ON (II).
2. Move the driver's window all the way down by holding the driver's switch firmly down; when the window reaches the bottom, hold the driver's window switch firmly down for 2 seconds.
3. Move the driver's window all the way up by holding the driver's switch firmly up; when the window reaches the top, hold the driver's window switch firmly up for 2 seconds.
4. If the window does not work in AUTO, turn the ignition switch OFF and repeat steps 1 through 3.
pro multis · About Operation CHARM