Driver's Dashboard Lower Cover

Driver's Dashboard Lower Cover Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program; call 888-424-6857

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.

1. Adjust the steering column upward.




2. Gently pull out on the lower edge of the dashboard lower cover (A) to detach the lower clips.




3. Detach the upper clips, and release the hook (A) and pin (B) by pulling the driver's dashboard lower cover (C) back.
4. Install the cover in the reverse order of removal, and note these items:
- Check for damaged or stress-whitened clips, and if necessary, replace them with new ones.
- Push the clips into place securely.