Operation CHARM: Car repair manuals for everyone.

SRS Indicator Stays ON:

SRS indicator stays on, but no DTCs are stored

1. Turn the ignition switch ON (II), and see if the PGM-FI indicator come on.

Does the PGM-FI indicator come on?

YES - Go to step 3.

NO - Go to the PGM-FI System troubleshooting.

2. Connect the HDS to the DLC.
3. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not troubleshoot the DLC circuit.
4. In Body Electrical on the HDS, check for DTCs.

Is DTCB1187 indicated?

YES - Go to the troubleshooting DTC B1187. B1187

NO - Faulty gauge control module (tach); replace the gauge control module (tach).