Opening The SRS Unit Shorting Connectors For Diagnosis

Opening the SRS Unit Shorting Connectors for Diagnosis

Special Tools Required
SRS short canceller 070AZ-SAA0100

NOTE:
- To prevent damage of the connector cavity, insert the short canceller straight into the cavity from the terminal side.
- Before installing the short canceller, wash it with neutral detergent, then air blow dry it.
- Do not use the short canceller if it is damaged.
- Make sure to remove the short canceller before reconnection.







When the SRS unit connectors A or B are disconnected, a short circuit is created in the connector by its own function to prevent an airbag deployment. The circuit may need to be open sometimes when diagnosis is performed on the system. Insert the short canceller (No. 070AZ-SAA0100) in the specified cavities when it is necessary to keep the circuit open for diagnosis.