Washer Fluid Level Switch: Testing and Inspection

Washer Fluid Level Switch Test

Canada

1. Remove the right inner fender.
- 2-door
- 4-door




2. Disconnect the 2P connector (A) from the washer fluid level switch (B).
3. Remove the washer fluid level switch from the washer reservoir.

NOTE: Fluid may flow out of the opening.

4. Check for continuity between the No. 1 and No. 2 terminals in each float position.
- There should be continuity when the float is down.
- There should be no continuity when the float is up.

5. If the continuity is not as specified, replace the switch.