DTC 61

DTC 61, 62: IG2 Voltage
1. Clear the DTC using the HDS.
2. Disconnect the HDS.
3. Turn the ignition switch OFF, then turn it ON (II) again.
4. Test-drive the vehicle at 6 mph (10 km/h) or more.
Does the ABS indicator come on?
YES - Go to step 5.
NO - The system is OK at this time.

5. Verify the DTC.
Is DTC 61 or 62 indicated?
YES - Go to step 6.
NO - Do the appropriate troubleshooting for the DTC.

6. Check the charging system.
Is charging system OK?
YES - Check for loose terminals at the ABS modulator-control unit 47P connector and G202. If the terminals and ground are OK, replace the ABS modulator-control unit.
NO - Troubleshoot and repair the charging system.