Hatch Upper Molding Replacement

Hatch Upper Molding Replacement




1. Using a clip remover, detach the clips, and pull the hatch upper molding (A) away to release the double-sided adhesive tape (B).
2. Scrape off the remaining double-sided adhesive tape from the hatch, then clean the hatch surface with a sponge dampened in alcohol.
3. Peel off the adhesive backing from the double-sided adhesive tape.
4. Hold the molding up, and align the clip holes in the molding with the mounting holes in the hatch, then install the molding.
5. Install the clips, and push on the adhesive tape portion of the molding securely.