Differential Installation

Differential Installation
1. Install the rear differential mount assembly A to the rear differential assembly (B).





2. Jack up the rear differential.
3. Install the new set rings (A) onto the driveshafts, then insert the driveshafts into the rear differential (B).





4. Lift the rear differential up into position, then push on both driveshafts to lock the set rings into place. Connect the breather tube (C).
5. Install the plates and the rear differential mount assembly mounting bolts.





6. Install the right and left rear differential mount brackets B, then torque the bolts (A) and rear differential damper(C).





7. Install the No. 2 propeller shaft (A) onto the rear differential (B) by aligning the reference marks (C) made during removal. Make sure you use new mounting bolts (D).





8. Install the tail pipe (A).





9. Fill the rear differential with the recommended fluid.