Audio Unit

Audio Unit Removal/Installation

SRS components are located in this area. Review the SRS component locations, and the precautions and procedures in the SRS before performing repairs or service.

NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.

1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
2. Remove the dashboard center panel.
3. Remove the four mounting bolts, then remove the audio unit.







4. Disconnect the audio connectors (A) and antenna lead (B).
5. Remove the eight mounting bolts securing the audio unit to the audio unit bracket.
6. Install the audio unit in the reverse order of removal, and note these items:
- Make sure the audio unit connector is plugged in properly, and the antenna lead is connected properly.
- Enter the anti-theft code for the radio, then enter the audio presets.