Transfer Housing Tapered Roller Bearing Outer Race Replacement
Transfer Housing Tapered Roller Bearing Outer Race ReplacementSpecial Tools Required
^ Driver 07749-0010000
^ Oil seal driver attachment 07947-SD90101
^ Bearing installer attachment 07KAF-PS30120
^ Bearing installer attachment 07LAF-PZ701 10
^ Installer shaft 14 x 165 mm 07JAF-SJ801 10
^ Installer nut 14 mm 07JAF-SJ80120
NOTE: Replace the bearing with a new one whenever the outer race is replaced.
1. Remove the bearing outer races from the transfer housing by heating the housing to about 212°F (100°C) with a heat gun. Do not heat the housing more than 212°F (100°C).
NOTE: Some 57 mm bearing outer races are not press-fitted, and can be removed without heating the housing.
Bearing Outer Race Locations
2. Install the 57 mm bearing outer race (A) in the housing (B) with the special tools.
3. Install the 62 mm bearing outer race and 50 mm bearing outer race in the housing with the special tools.
