Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2006 >> Pilot 2WD V6-3.5L >> Repair and Diagnosis >> Restraints and Safety Systems >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair >> ODS Unit Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

ODS Unit Replacement

ODS Unit Replacement

NOTE: Review the seat replacement procedures before doing repairs or service.

Removal
1. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
2. Disconnect the passenger's side airbag harness 2P connector.
3. Remove the front passenger's seat assembly and seat-back cover.




4. Remove the cover (A), then disconnect the ODS unit harness 18P connector D and sensor connectors (B) from the ODS unit.
5. Remove the three screws (C) and the ODS unit (E).

Installation




1. Place the new ODS unit (A) on the seat-back frame. Tighten the three screws (B), and connect the ODS harness 18P connector D and sensor connectors to the ODS unit. Reinstall the cover (C).
2. Install the seat-back cover.
3. Install the seat assembly, then connect the side airbag 2P connector.
4. Reconnect the negative cable to the battery.
5. Set the seat-back in the normal position, and make sure there is nothing on the front passenger's seat.
6. Initialize the ODS unit.
7. Calibrating the ODS unit.
8. After installing the ODS unit, confirm proper system operation: Turn the ignition switch ON (II); the SRS indicator should come on for about 6 seconds and then go off.
pro multis · About Operation CHARM