Trunk / Liftgate Hinge: Service and Repair

In-Bed Trunk Lid Hinge Replacement

NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the in-bed trunk lid.

1. Remove the in-bed trunk lid.




2. Detach harness clips (A) from the right in-bed trunk lid hinge (B), then remove the in-bed trunk lid subharness (C) from the hinge.




3. Remove the plug caps (A), washers (B), and nuts, then remove the left in-bed trunk lid hinge (C) and right in-bed trunk lid hinge (D).
4. Install the hinges in the reverse order of removal, and note these items:
- Make sure the subharness is routed properly.
- Adjust the in-bed trunk lid alignment.