Rear Seat Armrest Cover
Rear Seat Armrest Cover ReplacementNOTE: Take care not to tear the seams or damage the seat covers.
1. Remove the armrest from the seat-back.
2. Remove the armrest beverage holder from the armrest.
3. Using a 17 mm socket wrench, remove the pivot bolts, then remove the wave washers (A), washer (B), and pivot brackets (C) from both sides of the armrest (D).
4. If necessary, remove the collars (E) from the pivot brackets.
5. Release the hooks (A) and hook strip (B), and pull back the armrest cover (C) all the way around.
6. Release the armrest cover from the armrest pivot portions (D), then remove it from the pad (E).
7. Install the cover in the reverse order of removal, and to prevent wrinkles, make sure the material is stretched evenly over the pad before securing the hooks and hook strips.