Removal and Installation
Alternator Removal and InstallationRemoval
1. Make sure you have the anti-theft codes for the radio and the navigation system, then write down the customer's audio presets.
2. Disconnect the negative cable from the battery first, then disconnect the positive cable.
3. Remove the intake manifold cover.
4. Remove the drive belt.
5. Remove the harness clamp (A) and harness clamp bracket (B), then remove the harness holder (C).
6. Disconnect the alternator connector (D) and the BLK wire (E) from the alternator.
7. Remove the mounting bolt (A) and alternator bracket mounting bolt (B), then remove the alternator.
Installation
1. Install the alternator.
2. Connect the alternator connector (A) and the BLK wire (B) to the alternator.
3. Install the harness holder (C), then install the harness clamp bracket (D) and harness clamp (E).
4. Install the drive belt.
5. Install the intake manifold cover.
6. Connect the positive cable to the battery first, and then connect the negative cable.
7. Enter the anti-theft codes for the radio and the navigation system, then enter the customer's audio presets.
8. Do the power window control unit reset procedure.
9. Set the clock.