Front Seat Disassembly/Reassembly - Driver's 8-Way Power
Front Seat Disassembly/Reassembly - Driver's 8-Way PowerSpecial Tools Required
KTC trim tool set SOJATP2014 *
*Available through the American Honda Tool and Equipment Program.
- SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
- '04-07 models: The operation of the driver's seat position sensor must be checked after any of these actions:
- Driver's seat position sensor replacement
- Cover plate (front side of driver's seat slide rail) replacement
NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Apply multipurpose grease to the moving parts of the seat track.
- To prevent wrinkles in the seat cushion cover, stretch the material evenly over the pad.