Driver's Dashboard Lower Cover

Driver's Dashboard Lower Cover Removal/Installation

NOTE:
- Take care not to scratch the dashboard and related parts.
- When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

1. Adjust the steering column upward.




2. Remove the screw (A).
3. Pull out the bottom of the driver's dashboard lower cover (B) to detach the lower clips (C).
4. Detach the upper clips (D) and a hook (E) by pulling the driver's dashboard lower cover back.
5. If any of the clips (C, D) securing the driver's dashboard lower cover is hard to detach, pry it with a flat-tip screwdriver.




6. Remove the driver's dashboard lower cover (A). If equipped, disconnect the moonroof switch connector (B).
7. Install the cover in the reverse order of removal, and make sure each connector is plugged in properly.