Front Seat Linkage Disassembly/Reassembly - Passenger's 4-Way Power

Front Seat Linkage Disassembly/Reassembly - Passenger's 4-Way Power

'03 Model





NOTE:
- Put on gloves to protect your hands.
- Apply multipurpose grease to the sliding and pivot portions of the linkage.

'04-07 Models
- '04-05 models: The front passenger's weight sensor (SWS) unit must be calibrated after any of these actions:
- Front passenger's seat replacement (including any seat components)
- Replacement of the seat weight sensors
- Replacement of the seat weight sensor unit
- '06-07 models: The ODS unit must be calibrated after any for this actions,:
- Front passenger's seat replacement (including any seat components)
- Replacement of the seat weight sensors





NOTE:
- Put on gloves to protect your hands.
- Apply multipurpose grease to the sliding and pivot portions of the linkage.
- When tightening the weight sensor mounting nuts, tighten the nuts in the sequence shown. Improper tightening could cause the passenger's airbag system to malfunction.
- Make sure the weight sensor unit ('04-05 models) connectors are plugged in properly.
- Make sure the weight sensor wires are routed properly so they are not pinched and do not interfere with other parts.