A-Pillar Corner Trim Replacement

A-Pillar Corner Trim Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the corner trim and body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. Open the front door.




2. Carefully insert a appropriate trim tool next to the upper clip, and detach the clip by prying on the A-pillar corner trim (A). Take care not to scratch the body and related parts.




3. Pull the A-pillar corner trim (A) back by hand to detach remaining lower clips, then remove the trim.
4. Install the trim in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.