Driver's Outer Dashboard Trim

Driver's Outer Dashboard Trim Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.

1. Remove the instrument upper visor.




2. Pull out the upper edge of the driver's outer dashboard trim (A) by releasing the hooks (B) with a trim tool, then remove the trim.
3. Install the panel in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the hooks into place securely.