Front Splash Shield Replacement
Front Splash Shield ReplacementNOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the body and related parts.
1. Remove the splash shield (A).
1. Remove the bolts (B), then remove the clips (C) that secure the front inner fender (D) and front splash shield to the body.
2. From under the front bumper (E), remove the clips (F, G).
3. From under the body, remove the clips (H).
4. Pull the splash shield out.
NOTE: To remove the clips, pry the inner clip up at the edge near the line (I) on its head.
2. Install the splash shield in the reverse order of removal, and note these items:
- Check if the clips is damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.